Struct std::net::Ipv6Addr

pub struct Ipv6Addr { /* fields omitted */ }

An IPv6 address.

IPv6 addresses are defined as 128-bit integers in IETF RFC 4291. They are usually represented as eight 16-bit segments.

See IpAddr for a type encompassing both IPv4 and IPv6 addresses.

The size of an Ipv6Addr struct may vary depending on the target operating system.

Textual representation

Ipv6Addr provides a FromStr implementation. There are many ways to represent an IPv6 address in text, but in general, each segments is written in hexadecimal notation, and segments are separated by :. For more information, see IETF RFC 5952.

Examples

use std::net::Ipv6Addr;

let localhost = Ipv6Addr::new(0, 0, 0, 0, 0, 0, 0, 1);
assert_eq!("::1".parse(), Ok(localhost));
assert_eq!(localhost.is_loopback(), true);

Methods

impl Ipv6Addr

pub fn new(     a: u16,     b: u16,     c: u16,     d: u16,     e: u16,     f: u16,     g: u16,     h: u16 ) -> Ipv6Addr

Creates a new IPv6 address from eight 16-bit segments.

The result will represent the IP address a:b:c:d:e:f:g:h.

Examples

use std::net::Ipv6Addr;

let addr = Ipv6Addr::new(0, 0, 0, 0, 0, 0xffff, 0xc00a, 0x2ff);

pub fn localhost() -> Ipv6Addr

🔬 This is a nightly-only experimental API. (ip_constructors #44582)

requires greater scrutiny before stabilization

Creates a new IPv6 address representing localhost: ::1.

Examples

#![feature(ip_constructors)]
use std::net::Ipv6Addr;

let addr = Ipv6Addr::localhost();
assert_eq!(addr, Ipv6Addr::new(0, 0, 0, 0, 0, 0, 0, 1));

pub fn unspecified() -> Ipv6Addr

🔬 This is a nightly-only experimental API. (ip_constructors #44582)

requires greater scrutiny before stabilization

Creates a new IPv6 address representing the unspecified address: ::

Examples

#![feature(ip_constructors)]
use std::net::Ipv6Addr;

let addr = Ipv6Addr::unspecified();
assert_eq!(addr, Ipv6Addr::new(0, 0, 0, 0, 0, 0, 0, 0));

pub fn segments(&self) -> [u16; 8]

Returns the eight 16-bit segments that make up this address.

Examples

use std::net::Ipv6Addr;

assert_eq!(Ipv6Addr::new(0, 0, 0, 0, 0, 0xffff, 0xc00a, 0x2ff).segments(),
           [0, 0, 0, 0, 0, 0xffff, 0xc00a, 0x2ff]);

pub fn is_unspecified(&self) -> bool

Returns true for the special 'unspecified' address (::).

This property is defined in IETF RFC 4291.

Examples

use std::net::Ipv6Addr;

assert_eq!(Ipv6Addr::new(0, 0, 0, 0, 0, 0xffff, 0xc00a, 0x2ff).is_unspecified(), false);
assert_eq!(Ipv6Addr::new(0, 0, 0, 0, 0, 0, 0, 0).is_unspecified(), true);

pub fn is_loopback(&self) -> bool

Returns true if this is a loopback address (::1).

This property is defined in IETF RFC 4291.

Examples

use std::net::Ipv6Addr;

assert_eq!(Ipv6Addr::new(0, 0, 0, 0, 0, 0xffff, 0xc00a, 0x2ff).is_loopback(), false);
assert_eq!(Ipv6Addr::new(0, 0, 0, 0, 0, 0, 0, 0x1).is_loopback(), true);

pub fn is_global(&self) -> bool

🔬 This is a nightly-only experimental API. (ip #27709)

extra functionality has not been scrutinized to the level that it should be to be stable

Returns true if the address appears to be globally routable.

The following return false:

• the loopback address
• link-local, site-local, and unique local unicast addresses
• interface-, link-, realm-, admin- and site-local multicast addresses

Examples

#![feature(ip)]

use std::net::Ipv6Addr;

fn main() {
    assert_eq!(Ipv6Addr::new(0, 0, 0, 0, 0, 0xffff, 0xc00a, 0x2ff).is_global(), true);
    assert_eq!(Ipv6Addr::new(0, 0, 0, 0, 0, 0, 0, 0x1).is_global(), false);
    assert_eq!(Ipv6Addr::new(0, 0, 0x1c9, 0, 0, 0xafc8, 0, 0x1).is_global(), true);
}

pub fn is_unique_local(&self) -> bool

🔬 This is a nightly-only experimental API. (ip #27709)

extra functionality has not been scrutinized to the level that it should be to be stable

Returns true if this is a unique local address (fc00::/7).

This property is defined in IETF RFC 4193.

Examples

#![feature(ip)]

use std::net::Ipv6Addr;

fn main() {
    assert_eq!(Ipv6Addr::new(0, 0, 0, 0, 0, 0xffff, 0xc00a, 0x2ff).is_unique_local(),
               false);
    assert_eq!(Ipv6Addr::new(0xfc02, 0, 0, 0, 0, 0, 0, 0).is_unique_local(), true);
}

pub fn is_unicast_link_local(&self) -> bool

🔬 This is a nightly-only experimental API. (ip #27709)

extra functionality has not been scrutinized to the level that it should be to be stable

Returns true if the address is unicast and link-local (fe80::/10).

This property is defined in IETF RFC 4291.

Examples

#![feature(ip)]

use std::net::Ipv6Addr;

fn main() {
    assert_eq!(Ipv6Addr::new(0, 0, 0, 0, 0, 0xffff, 0xc00a, 0x2ff).is_unicast_link_local(),
               false);
    assert_eq!(Ipv6Addr::new(0xfe8a, 0, 0, 0, 0, 0, 0, 0).is_unicast_link_local(), true);
}

pub fn is_unicast_site_local(&self) -> bool

🔬 This is a nightly-only experimental API. (ip #27709)

extra functionality has not been scrutinized to the level that it should be to be stable

Returns true if this is a deprecated unicast site-local address (fec0::/10).

Examples

#![feature(ip)]

use std::net::Ipv6Addr;

fn main() {
    assert_eq!(Ipv6Addr::new(0, 0, 0, 0, 0, 0xffff, 0xc00a, 0x2ff).is_unicast_site_local(),
               false);
    assert_eq!(Ipv6Addr::new(0xfec2, 0, 0, 0, 0, 0, 0, 0).is_unicast_site_local(), true);
}

pub fn is_documentation(&self) -> bool

🔬 This is a nightly-only experimental API. (ip #27709)

extra functionality has not been scrutinized to the level that it should be to be stable

Returns true if this is an address reserved for documentation (2001:db8::/32).

This property is defined in IETF RFC 3849.

Examples

#![feature(ip)]

use std::net::Ipv6Addr;

fn main() {
    assert_eq!(Ipv6Addr::new(0, 0, 0, 0, 0, 0xffff, 0xc00a, 0x2ff).is_documentation(),
               false);
    assert_eq!(Ipv6Addr::new(0x2001, 0xdb8, 0, 0, 0, 0, 0, 0).is_documentation(), true);
}

pub fn is_unicast_global(&self) -> bool

🔬 This is a nightly-only experimental API. (ip #27709)

extra functionality has not been scrutinized to the level that it should be to be stable

Returns true if the address is a globally routable unicast address.

The following return false:

• the loopback address
• the link-local addresses
• the (deprecated) site-local addresses
• unique local addresses
• the unspecified address
• the address range reserved for documentation

Examples

#![feature(ip)]

use std::net::Ipv6Addr;

fn main() {
    assert_eq!(Ipv6Addr::new(0x2001, 0xdb8, 0, 0, 0, 0, 0, 0).is_unicast_global(), false);
    assert_eq!(Ipv6Addr::new(0, 0, 0, 0, 0, 0xffff, 0xc00a, 0x2ff).is_unicast_global(),
               true);
}

pub fn multicast_scope(&self) -> Option<Ipv6MulticastScope>

🔬 This is a nightly-only experimental API. (ip #27709)

extra functionality has not been scrutinized to the level that it should be to be stable

Returns the address's multicast scope if the address is multicast.

Examples

#![feature(ip)]

use std::net::{Ipv6Addr, Ipv6MulticastScope};

fn main() {
    assert_eq!(Ipv6Addr::new(0xff0e, 0, 0, 0, 0, 0, 0, 0).multicast_scope(),
                             Some(Ipv6MulticastScope::Global));
    assert_eq!(Ipv6Addr::new(0, 0, 0, 0, 0, 0xffff, 0xc00a, 0x2ff).multicast_scope(), None);
}

pub fn is_multicast(&self) -> bool

Returns true if this is a multicast address (ff00::/8).

This property is defined by IETF RFC 4291.

Examples

use std::net::Ipv6Addr;

assert_eq!(Ipv6Addr::new(0xff00, 0, 0, 0, 0, 0, 0, 0).is_multicast(), true);
assert_eq!(Ipv6Addr::new(0, 0, 0, 0, 0, 0xffff, 0xc00a, 0x2ff).is_multicast(), false);

pub fn to_ipv4(&self) -> Option<Ipv4Addr>

Converts this address to an IPv4 address. Returns None if this address is neither IPv4-compatible or IPv4-mapped.

::a.b.c.d and ::ffff:a.b.c.d become a.b.c.d

Examples

use std::net::{Ipv4Addr, Ipv6Addr};

assert_eq!(Ipv6Addr::new(0xff00, 0, 0, 0, 0, 0, 0, 0).to_ipv4(), None);
assert_eq!(Ipv6Addr::new(0, 0, 0, 0, 0, 0xffff, 0xc00a, 0x2ff).to_ipv4(),
           Some(Ipv4Addr::new(192, 10, 2, 255)));
assert_eq!(Ipv6Addr::new(0, 0, 0, 0, 0, 0, 0, 1).to_ipv4(),
           Some(Ipv4Addr::new(0, 0, 0, 1)));

pub fn octets(&self) -> [u8; 16]

Returns the sixteen eight-bit integers the IPv6 address consists of.

use std::net::Ipv6Addr;

assert_eq!(Ipv6Addr::new(0xff00, 0, 0, 0, 0, 0, 0, 0).octets(),
           [255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0]);

Trait Implementations

impl Copy for Ipv6Addr

impl From<Ipv6Addr> for IpAddr

fn from(ipv6: Ipv6Addr) -> IpAddr

Performs the conversion.

impl Display for Ipv6Addr

fn fmt(&self, fmt: &mut Formatter) -> Result

Formats the value using the given formatter.

impl Debug for Ipv6Addr

fn fmt(&self, fmt: &mut Formatter) -> Result

Formats the value using the given formatter.

impl Clone for Ipv6Addr

fn clone(&self) -> Ipv6Addr

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl PartialEq for Ipv6Addr

fn eq(&self, other: &Ipv6Addr) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use] fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl PartialEq<IpAddr> for Ipv6Addr

fn eq(&self, other: &IpAddr) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use] fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl PartialEq<Ipv6Addr> for IpAddr

fn eq(&self, other: &Ipv6Addr) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use] fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl Eq for Ipv6Addr

impl Hash for Ipv6Addr

fn hash<H: Hasher>(&self, s: &mut H)

Feeds this value into the given [Hasher].

fn hash_slice<H>(data: &[Self], state: &mut H) where     H: Hasher,

Feeds a slice of this type into the given [Hasher].

impl PartialOrd for Ipv6Addr

fn partial_cmp(&self, other: &Ipv6Addr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use] fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use] fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use] fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use] fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd<Ipv6Addr> for IpAddr

fn partial_cmp(&self, other: &Ipv6Addr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use] fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use] fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use] fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use] fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd<IpAddr> for Ipv6Addr

fn partial_cmp(&self, other: &IpAddr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use] fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use] fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use] fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use] fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl Ord for Ipv6Addr

fn cmp(&self, other: &Ipv6Addr) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

impl From<Ipv6Addr> for u128

fn from(ip: Ipv6Addr) -> u128

Performs the conversion.

impl From<u128> for Ipv6Addr

fn from(ip: u128) -> Ipv6Addr

Performs the conversion.

impl From<[u8; 16]> for Ipv6Addr

fn from(octets: [u8; 16]) -> Ipv6Addr

Performs the conversion.

impl From<[u16; 8]> for Ipv6Addr

fn from(segments: [u16; 8]) -> Ipv6Addr

Performs the conversion.

impl FromStr for Ipv6Addr

type Err = AddrParseError

The associated error which can be returned from parsing.

fn from_str(s: &str) -> Result<Ipv6Addr, AddrParseError>

Parses a string s to return a value of this type.